A.learning
B.listening
C.discarding
D.forwarding
您可能感興趣的試卷
你可能感興趣的試題
The following configuration line was added to router R1
Access-list 101 permit ip 10.25.30.00.0.0.255 any
What is the effect of this access list configuration?()
A.ermit all packets matching the first three octets of the source address to all destinations
B.permit all packet matching the last octet of the destination address and accept all source addresses
C.permit all packet matching the host bits in the source address to all destinations
D.permit all packet from the third subnet of the network address to all destinations
A.172.16.16.0
B.176.24.0.0
C.172.16.0.0
D.172.16.28.0
A.server
B.client
C.tunnel
D.transparent
A.traceroute address
B.tracert address
C.ssh address
D.telnet address
A.Switches take less time to process frames than hubs take.
B.Switches do not forward broadcasts.
C.Hubs can filter frames.
D.Using hubs can increase the amount of bandwidth available to hosts.
E.Switches increase the number of collision domains in the network.
最新試題
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
要將數據包發送到遠程網絡,應使用哪種設備?()
何時必須使用clock rate 命令配置路由器串行接口?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。下列哪組設備僅包含中間設備?()