业余性自由色xxxx视频,美女视频在线观看

多項選擇題The network 172.25.0.0 has been divided into eight equal subnets. Which of the following IP addresses can be assigned to hosts in the third subnet if the ip subnet-zero command is configured on the router? （）

A.172.25.78.243
B.172.25.98.16
C.172.25.72.0
D.172.25.94.255
E.172.25.96.17
F.172.25.100.16

點擊查看答案

您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Why does RouterA show multiple unequal cost paths to network 192.168.81.0/24（）。

A.A variance was configured for EIGRP autonomous system 109.
B.The EIGRP topology table displays all routes to a destination.
C.The EIGRP topology table shows only backup routes to a destination.
D.Multiple floating static routes were configured to network 192.168.81.0 via interface Serial0.

點擊查看答案

2.多項選擇題What are the possible trunking modes for a switch port? （）

A.transparent
B.auto
C.on
D.desirable
E.client
F.forwarding

點擊查看答案

3.多項選擇題What should be done prior to backing up an IOS image to a TFTP server? （）

A.Make sure that the server can be reached across the network.
B.Check that authentication for TFTP access to the server is set.
C.Assure that the network server has adequate space for the IOS image.
D.Verify file naming and path requirements.
E.Make sure that the server can store binary files.
F.Adjust the TCP window size to speed up the transfer.

點擊查看答案

4.多項選擇題Workstation A has been assigned an IP address of 192.0.2.24/28.Workstation B has been assigned an IP address of 192.0.2.100/28.The two workstations are connected with a straight-through cable.Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts？（）

A.Replace the straight-through cable with a crossover cable
B.Change the subnet mask of the hosts to /25
C.Change the subnet mask of the hosts to /26
D.Change the address of Workstation A to 192.0.2.15
E.Change the address of Workstation B to 192.0.2.111

點擊查看答案

5.多項選擇題The network security policy requires that only one host be permitted to attach dynamically to each switch interfacE.If that policy is violated, the interface should shut down. Which two commands must the network administrator configure on the 2950 Catalyst switch to meet this policy? （）

A.Switch1(config-if)# switchport port-security maximum 1
B.Switch1(config)# mac-address-table secure
C.Switch1(config)# access-list 10 permit ip host
D.Switch1(config-if)# switchport port-security violation shutdown
E.Switch1(config-if)# ip access-group 10

點擊查看答案