A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
您可能感興趣的試卷
你可能感興趣的試題
A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the runningconfiguration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
A.1~99
B.100~199
C.1300~1999
D.2000~2699
A.The switch must be configured with an IP address,subnet mask,and default gateway.
B.The switch must be connected to a router over a VLAN trunk.
C.The switch must be reachable through a port connected to its management VLAN.
D.The switch console port must be connected to the Ethernet LAN.
E.The switch management VLAN must be created and have a membership of at least one switch port.
F.The switch must be fully configured as an SNMP agent.
A.使用策略控制來結合認證、用戶接入和管理員接入對接入安全性進行擴展
B.提供更大的靈活性和機動性、增強的安全性以及用戶生產力增益
C.對所有用戶采用統一的安全策略
D.減少在擴展用戶和管理員對網絡的接入時所需的管理性和運營負擔
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()
A.The new IOS image is too large for the router flash memory.
B.The TFTP server is unreachable from the router.
C.The new IOS image is not correct for this router platform.
D.The IOS image on the TFTP server is corrupt.
E.There is not enough disk space on the TFTP server for the IOS image.
最新試題
OSI 哪一層可提供有序的數據重構服務?()
要將數據包發送到遠程網絡,應使用哪種設備?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()