Refer to the exhibit.Which three statements correctly describe Network Device A？（）
A.With a network wide mask of 255.255.255.128， each interface does not require an IP address.
B.With a network wide mask of 255.255.255.128， each interface does require an IP address on a unique IP subnet.
C.With a network wide mask of 255.255.255.0， must be a Layer 2 device for the PCs to communicate with each other.
D.With a network wide mask of 255.255.255.0， must be a Layer 3 device for the PCs to communicate with each other.
E.With a network wide mask of 255.255.254.0， each interface does not require an IP address.
您可能感興趣的試卷
你可能感興趣的試題
如圖所示。主機A與服務器進行通信。什么將會從服務器接收到主機A的幀的源MAC地址？（）
A.服務器的網絡接口的MAC地址
B.主機A的MAC地址
C.路由器接口e1 MAC地址
D.路由器接口e0 MAC地址（host A收到server的幀的源mac地址是host A的網關的mac。）
A.2031:0:130F::9C0:876A:130B
B.2001:0DB8:0000:130F:0000:0000:08GC:140B
C.2001:0DB8:0:130H::87C:140B
D.2031::130F::9C0:876A:130B
A.ARP
B.SSH
C.Telnet
D.WEP
E.SNMPv1
F.SNMPv2
Refer to the exhibit.The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem？（）
A.Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.Ensure that cables A and B are straight-through cables.
C.Ensure cable A is plugged into a trunk port.
D.Ensure the switch has power.
E.Reboot all of the devices.
F.Reseat all cables.
A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable split horizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP
最新試題
請參見圖示。下列哪組設備僅包含中間設備？（）
在Cisco IOS 設備中，啟動配置文件存儲于何處？（）
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet?？梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址？（）
要將數據包發送到遠程網絡，應使用哪種設備？（）
何時必須使用clock rate 命令配置路由器串行接口？（）
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是，從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題？（）
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述？（）
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置？（）
OSI 哪一層可提供有序的數據重構服務？（）
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序？（）