Refer to the exhibit. What will Router1 do when it receives the data frame shown?（）
A.Router1 will strip off the source MAC address and replace it with the MAC address 0000.0c36.6965.
B.Router1 will strip off the source IP address and replace it with the IP address 192.168.40.1.
C.Router1 will strip off the destination MAC address and replace it with the MAC address 0000.0c07.4320.
D. Router1 will strip off the destination IP address and replace it with the IP address of 192.168.40.1.
E.Router1 will forward the data packet out interface FastEthernet0/1.
F.Router1 will forward the data packet out interface FastEthernet0/2.
您可能感興趣的試卷
你可能感興趣的試題
A.response
B.trap
C.cet
D.capture
A.It requires the use of ARP.
B.It can support multiple IPv6 subnets on a single link.
C.It supports up to 2 instances of OSPFv3 over a common link.
D.It routes over links rather than over networks.
A.It is locally significant and must be the same throughout an area
B.It is globally significant and is used to represent the AS number
C.It is locally significant and is used to identify an instance of the OSPF database
D.It is globally significant and is used to identify OSPF stub areas
A.it reduces the number of required OSPF neighbor adjacencies
B.It reduces the types of LSAs that are generated
C.It is less CPU intensive for routers in the single area
D.It increases LSA response times.
E.It removes the need for virtual links
A.flash
B.The logging buffer
C.The console terminal
D.other terminals
E.Syslog server
A.MIB
B.manager
C.supervisor
D.agent
E.set
F.AES
A.network 0.0.0.0 255.255.255.255 area 0
B.network 0.0.0.0 0.0.0.0 area 0
C.network 255.255.255.255 0.0.0.0 area 0
D.network all-interfaces area 0
A.GLBP supports up to eight virtual forwarders per GLBP group
B.GLBP supports clear text and MD5 password authentication between GLBP group members
C.GLBP is an open source standardized protocol that can be used with multiple vendors
D.GLBP supports up to 1024 virtual routers
E.GLBP can load share traffic across a maximum of four routers
F.GLBP elects two AVGs and two standby AVGs for redundancy
A.To identify applications causing congestion
B.To authorize user network access
C.To report and alert link up / down instances.
D.To diagnose slow network performance, bandwidth hogs, and bandwidth utilization.
E.To detect suboptimal routing in the network.
F.To confirm the appropriate amount of bandwidth that has been allocated to each Class of Service.
A.informational
B.emergency
C.warning
D.critical
E.debug
F.error
最新試題
What command instructs the device to timestamp Syslog debug messages in milliseconds?（）
A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? （）
Which three are the components of SNMP? （）
What SNMP message alerts the manager to a condition on the network?（）
What are three benefits of GLBP?（）
Which one of these is a valid HSRP Virtual Mac Address?（）
What OSPF command, when configured, will include all interfaces into area 0?（）
Which three statements about the features of SNMPv2 and SNMPv3 are true?（）
Which three statements about Syslog utilization are true?（）
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow?（）