Refer to the exhibit. According to the output of the command show tag-switching forwarding-table, which four of these statements are true?()
A.Packets to the IP address 10.10.10.5/32 will be tagged with "17" toward the next hop.
B.Label "19" will be advertised to MPLS neighbors so that they can use this label to reach the IP address 10.10.10.6/32.
C.IP address 10.10.10.4/32 is directly connected to the neighbor router on serial 3/0.
D.Packets arriving with label "17" will be forwarded without any label toward serial 4/0.
E.Packets arriving with label "20" will be forwarded with label "21" after label-swapping.
F.Label "20" is advertised to MPLS neighbors so that they can use this information to reach the prefix 10.10.10.8/32.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. There are two sites connected across WAN links. All intersite and intrasite links always have the same routing metric. The network administrator sees only the top routers and links being used by hosts at both LAN A and LAN B. What would be two suggestions to load-balance the traffic across both WAN links?()
A.Make HSRP track interfaces between the edge and core routers.
B.Replace HSRP with GLBP.
C.Add crossed intrasite links: R1-R4, R2-R3, R5-R8, and R6-R7.
D.Make R3 and R8 have lower HSRP priority than R1 and R7.
E.Replace HSRP with VRRP
A.ping 192.168.1.255
B.ping with sweep option
C.ping 192.168.1.127
D.ping 192.168.1.64
E.ping with broadcast option
A.OSPF standard hellos
B.Cisco Discovery Protocol link detection
C.Bidirectional Forwarding Detection
D.Fast Link Pulse
E.autonegotiation
最新試題
what is the advantage of policing opposite to shaping?
Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?()
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
What field in IP packet is used for classification by QOS?
A default Frame Relay WAN is classified as what type of physical network?()
兩ebgp鄰居發(fā)路由過來 ,哪些屬性重置?
當將多個交換機加入到MST region當中會發(fā)生什么(what happen)?
hsrp speak狀態(tài)是什么意思?
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?()
The Frame Relay network in the diagram is not functioning properly.What is the cause of the problem?()