A.It prevents message looping， Session Advertisement （SA）messages must be RPF checked
B.RPF check should be done against the route to the source S of the corresponding PIM-SM domain
C.RPF check should be done against the route to the Rendez-vous Point of the corresponding PIM-SM domain，which originated the SA
D.RPF checking Session Advertisement （SA） messages will cause message looping
您可能感興趣的試卷
你可能感興趣的試題
A.The VPNv6 address is a 96-bit route distinguisher and a 128-brt IPv6 address
B.The VPNv6 address is a 64-bit route distinguisher and a 128-bit IPv6 address
C.The VPNv6 address is a 64-brt route distinguisher and a 96-brt IPv6 address
D.The VPMv6 address is a 96-brt route distinguisher and a 96-bit IPv6 address
E.The VPNv6 address is a 128-bit route distinguisher and a 128-brt IPv6 address
A.NAP and NSP provide secure access to corporate gateways without managing end-to-end PVCs.NAP and NSP use Layer 3 routing，Layer 2 Forwarding，or Layer 2 Tunneling Protocol tunnels.Hence，they can scale their business models for selling wholesale service
B.The NSP can oversubscribe by deploying idle and session timeouts using an industry standard RADIUS server for each subscriber
C.Only a single session per CPE on one virtual channel （VC).The username and password are configured on the CPE， so all users behind the CPE for that particular VC can access only one set ofservices. Users cannot select different sets of services， although using multiple VCs and establishing different PPP session on different VCs is possible
D.If a single IP address is provided to the CPE， and NAT or PAT is implemented，certain applications such as IPTV，which embed IP information in the payload， well not work. Additionally，if an IP subnet feature is used，an IP address also has to be reserved for the CPE
E.PPPoA can use the features on the Cisco Service Selection Gateway （SSG）
A.trunk admission control
B.forwarding traffic to tunnel
C.information distribution
D.path selection， calculation， and setup
E.traffic patterns prediction
A.MPLS is required between the PE and CE routers that connect the backbone carrier to the customer carrier.
B.The backbone carrier must enable the PE router to check that the packets it receives from the CErouter contain only the labels that the PE router advertised to the CE router.
C.Every packet that crosses the backbone carrier must be encapsulated so that the packet includes MPLS labels
D.AII PE routers that link the backbone carrier to the customer carrier must run Route Target Rewrite.
E.Arouting protocol is required between the PE and CE routers that connect the backbone carrierto thecustomer carrier. The routing protocol enables the customer carrier to exchange IGP routing information with the backbone carrier.
A.immediately after receiving the first packet on the shared tree for a given （S，G）
B.after receiving over 1 kb/s traffic onthe shared tree for a given （S，G）
C.10 seconds after receiving the first packet on the shared tree for a given （S，G）
D.30 seconds after receiving the first packet on the shared tree for a given （S，G）
E.after receiving over 10 kb/s traffic onthe shared tree for a given （S，G）
最新試題
Which tree of these are types of Ethernet Virtue Connections （EVCs） in the MEF concept？（）
What method of streaming live video is the least taxing on bandwidth in a large enterprise environment？（）
Which four statements about Ethernet virtual circuit （EVC） infrastructure are true？ （）
Which statement about the use of Route Target Rewrite is true？（）
Cisco IOS XR Software Multicast Routing Implementation， which three features are supported in IPv6 onCisco CRS router？（）
Which Modular QoS CLI （MQC） based output queuing method is designed to support multiple trafficclasses including VoIP traffic， mission-critical traffic， interactive traffic， and default class traffic？（）
When an MPLS Layer 2 VPN runs in the hub-and-spoke model， where is QoS implemented？（）
Which statement about multicast VPN is true？（）
Which two requirements to deploy 6PE and 6VPE solutions are mandatory？（）
Assume that the PEs are separated by Multiple P routers.How many labels should the ingress PE push for BPE functionality？（）