A. If the classification policy is based upon the ToS byte， the qos pre-classify command is required because the ToS byte only appears in the inner IP header.
B. The ToS byte is copied to the outer header by default. Therefore， the qos pre-classify command is not necessary.
C. With GRE encapsulation， the qos pre-classify command is applied on the tunnel interface. This practice allows for different OoS configurations on each tunnel.
D. With GRE encapsulation， the qos pre-classify command is applied on the physical interface. This practice allows for different OoS configurations on each interface.
E. With IPsec encapsulation， the qos pre-classify command is applied on the physical interface. This practice allows for different OoS configurations on each interface.
您可能感興趣的試卷
你可能感興趣的試題
A. In a Frame Relay network， delay sensitive traffic is tagged with the discard eligible （DE） bit.
B. In an MPLS network， the three most significant bits of the DSCP or the IP precedence of the IP packet are copied into the MPLS EXP field
C. In an MPLS network， the MPLS EXP bits are used to identify up to 16 CoS values.
D. The differentiated services code point （DSCP） field consists of the first three bits of the IP precedence field in the header of an IP packet.
E. The 802.10 standard uses a three bitfield referred to as the user priority bits （PRI） to mark packets as belonging to a specific CoS.
Refer to the exhibit. Which two statements accurately describe the pictured WPA wireless LAN controller configuration?（）
A.WPA1 is disabled and WPA2 is enabled.
B.WPA1 is enabled and WPA2 is disabled.
C.WPA1 is enabled and WPA2 is enabled.
D.TKIP is the default parameter for WPA1 andWPA2.
E.AES is the default parameter for WPA1 and WPA2.
F.The default WPA1 and WPA2 parameters are enabled
A.It compresses the Layer 2 payload and marks the packet as a high priority to be transmitted first
B.It fragments larger packets and allows VoIP packets to be transmitted in between them.
C.It stops the transmission of large packets when priority packets arrive.
D.It sends high priority packets in between normal traffic packets.
A.Use WFQ， CBWFO， and LLO to prioritize delay-sensitive packets
B.Use WFO， CBWFO， and LLO to compress the payload.
C.Give TCP packets priority over UDP packets.
D.Use control plane policing for cRTP queuing.
E.Use stacker and predictor to compress the payload.
Refer to the exhibit. On the basis of the configuration that is provided, which statement is true?（）
A.The Auto OoS policies will be attached to the interface.
B.Data about the network traffic will be collected via the use of NBAR-based protocol discovery， and the traffic on the network will be analyzed.
C.The class maps and policy maps will be created and installed on the basis of the information that is collected during the autodiscovery phase
D.Templates will be created that will be used to create policy maps and class maps to configure the OoS features on the network.
最新試題
When deploying a Cisco Wireless Control System （WCS） with the 2700 series location appliance， to within what range is on-demand location of rogue APs possible？（）
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）
What are the three models of quality of service （QoS） in a network？（）
Which two characteristics are common between traffic policing and traffic shaping？（）
What are two ways to minimize the delay of VoIP packets that are traversing a network？ （）
Which two statements are true about Voice over IP （VoIP） packet delivery in a digital infrastructure？ （）
Which three benefits are realized by implementing Wireless LAN Solution Engine （WLSE）？（）
Which statement is true about the Call Admission Control （CAC） feature in VoIP networks？（）
Which three functions are associated with a Cisco Unified CallManager？ （）
Which set of classes correctly identifies the four traffic classes， from highest priority to lowest priority， specified in the 802.11e standard？（）