多項選擇題

Refer to the exhibit. On the basis of the output generated by the show commands, which twostatements are true?()

A.All interfaces on the switch have been configured as access ports
B.Because it has not been assigned to any VLAN, interface gigabitethernet 0/1 does not appearin the show vlan output
C.Because it is configured as a trunk interface, interface gigabitethernet 0/1 does not appear inthe show vlan output
D.There are no native VLANs configured on the trunk
E.VLAN 1 will not be encapsulated with an 802.1q header
F.VLAN 2 will not be encapsulated with an 802.1q header


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

Refer to the exhibit. Based upon the output of show vlan on switch CAT2, what can we concludeabout interfaces Fa0/13 and Fa0/14?()

A.that interfaces Fa0/13 and Fa0/14 are in VLAN 1
B.that interfaces Fa0/13 and Fa0/14 are down
C.that interfaces Fa0/13 and Fa0/14 are trunk interfaces
D.that interfaces Fa0/13 and Fa0/14have a domain mismatch with another switch
E.that interfaces Fa0/13 and Fa0/14have a duplex mismatch with another switch

2.多項選擇題

Refer to the show interface Gi0/1 switchport command output shown in the exhibit. Which twostatements are true about this interface?()

A.This interface is a member of a voice VLAN
B.This interface is a dot1q trunk passing all configured VLANs
C.This interface is a member of VLAN7
D.This interface is configured for access mode
E.This interface is a member of VLAN1

3.單項選擇題Which of the following commands would you enter if you wanted to display spanning treestatistical information?()

A.show spantree backbonefast
B.show spantree statistics
C.show spantree uplinkfast
D.show spantree blockedports
E.show spantree portstate
F.show spantree portvlancost

5.單項選擇題What should you do to reduce spanning-tree protocol BPDU traffic during extended periods ofinstability in your VLANs?()

A.Combine all the VLAN spanning trees into a single spanning tree
B.Set forward delay and max-age timers to the maximum possible values
C.None of the choices
D.Change the router VTP server mode
E.Disable the root bridge

最新試題

Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.(Not all options will be used)

題型:?jiǎn)柎痤}

Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()

題型:?jiǎn)雾?xiàng)選擇題

Drag the IPsec protocol description from the above to the correct protocol type on the below.(Notall descriptions will be used)Drag and Drop question, drag each item to its proper location.

題型:?jiǎn)柎痤}

Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct?()

題型:?jiǎn)雾?xiàng)選擇題

You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec, which two parameters are required when defining the tunnel interfaceinformation?()

題型:多項選擇題

A new router was configured with the following commands:The configuration above was found on an Internet Service Provider’s (ISP) Multiprotocol LabelSwitching (MPLS) network. What is its purpose?()

題型:?jiǎn)雾?xiàng)選擇題

As a network engineer, study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem?()

題型:?jiǎn)雾?xiàng)選擇題

In computer security, AAA stands for authentication, authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct?()

題型:?jiǎn)雾?xiàng)選擇題

Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.

題型:?jiǎn)柎痤}

Drag the DSL technologies on the left to their maximum(down/up) data rate values on the below.

題型:?jiǎn)柎痤}