多項選擇題Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?()

A. TestKingRouter(config)# router ospf 0
B. TestKingRouter(config)# router ospf 1
C. TestKingRouter(config)# router ospf area 0
D. TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0
E. TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0
F. TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題On what kinds of networks does OSPF elect a backup designated router?()

A. Point-to-point
B. Point to multipoint
C. Broadcast
D. Non-broadcast multi-access

2.多項選擇題Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.()

A. All OSPF networks require the use of multiple areas
B. Multiple OSPF areas must connect to area 0
C. Single area OSPF networks must be configured in area 1
D. Areas can be assigned any number from 0 to 63535
E. Area 0 is called the backbone area
F. Each OSPF area need to be configured with a loopback interface

3.多項選擇題Which two are NOT characteristics of the OSPF routing protocol?()

A. It confines network instability to a single area of network.
B. It increases the routing overhead of the network
C. It supports VLSM
D. It routes between Autonomous Systems.
E. It allows extensive control of routing updates

5.多項選擇題What are the characteristic of link state routing protocols?()

A. The exchange of advertisement is triggered by a change in the network.
B. All routers exchange routing tables with each other iIn a multipoint network.
C. Packets are routed based upon the shortest path to the destination.
D. Paths are chosen depending on the cost efficiency factor.
E. Every router in an OSPF area is capable of representing the entire network topology.
F. Only the designated router in an OSPF area can represent the entire network topology.

最新試題

Five minutes after issuing the show running-config command, a technician enters the command again and notices that several access list statements have been altered. Because of this, the technician believes that the router is being configured by an unknown person through Telnet. Before changing the router passwords, the technician would like to discover if anyone is connected to the router by Telnet and stop them from making further changes.Which commands will accomplish these options?()

題型:多項選擇題

Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? ()

題型:單項選擇題

Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()

題型:多項選擇題

Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?()

題型:單項選擇題

What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?()

題型:單項選擇題

A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? ()

題型:單項選擇題

New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()

題型:單項選擇題

What does a configuration Register Setting of 0x2105 indicate to the Router? ()

題型:單項選擇題

Which of the following host addresses are member of networks that can be routed across the public Internet? ()

題型:多項選擇題

The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?()

題型:單項選擇題