多項選擇題Which three options are supported as address allocation mechanisms for DHCP on Cisco routers?()

A. The IP address can be automatically assigned to a host.
B. The IP address can be assigned as a random hash value of the burned - in - address of the lowest - numbered LAN interface on the router.
C. The network administrator can assign a speci fic IP address to a specific host MAC address.
D. The IP address can be assigned from configured pools in a reverse lexicographical order.
E. The IP address can be assigned to a host for a limited time or until the host explicitly releases the address.
F. The IP address can be assigned to a host until the host usurps the assigned value using its own dynamic override mechanism.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

Refer to the exhibit. On the basis of  the output, what two conclusions can be reached?()

A. The default administrative distance has been changed.
B. IS - IS is not enabled.
C. Three physical interfaces are taking part in integrated IS - IS.
D. IS - IS is not redistributing any oth er routing protocols.
E. There are two neighboring routers sending IS - IS routing information.
F. Address summarization is configured.

2.多項選擇題

Refer to the exhibit. What three statements are true about the IS - IS configuration?()

A.The router is in area 49.0001.0002
B.The router acts as a Level 1 - 2 router
C.CLNS routing is enable d for the router
D.The router has a system ID of 0003.0004
E.The interfaces have a functional IS - IS configuration
F.The network service access point selector (NSEL) byte has a value of 0

3.多項選擇題

Refer to the exhibit. This network is running IS - IS. Router RTC is inside Cloud#1. From the output on RTD, which two statement s are true?()

A.Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packets
B.IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLC
C.The SNPA for RTE is the source data link address that is used to transmit frames to RTD
D.IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLC
E.The NET for RTE will be 49.0150.0019.06b7.fd5f.00
F.IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS

4.單項選擇題

Refer to the exhibit. Router R1 is being used as a relay device for autoconfiguration of switch S1.Which configuration will acc omplish this? ()

A.S1(config)# interface fastethernet 0/1   S1(config - if)# ip helper - address 10.0.0.2
B.S1(config)# interface fastethernet 0/1   S1(config - if)# ip helper - address 20.0.0.1
C.R1(config)# interface fastethernet 0/0   R1(config - if)# ip help er - address 20.0.0.2R   1(config - if)# ip helper - address 20.0.0.3   R1(config - if)# ip helper - address 20.0.0.4   R1(config - if)# exit   R1(config)# interface fastethernet 0/1   R1(config - if)# ip helper - address 10.0.0.1
D.R1(config)# interface fastethernet 0/0   R1 (config - if)# ip helper - address 20.0.0.1   R2(config)# interface fastethernet 0/0   R2(config - if)# ip helper - address 20.0.0.1   R3(config)# interface fastethernet 0/0   R3(config - if)# ip helper - address 20.0.0.1   R4(config)# interface fastethernet 0/0   R4(config - if)# ip helper - address 20.0.0.1
E.S1(config)# interface fastethernet 0/1   S1(config - if)# ip helper - address 10.0.0.2   R2(config)# interface fastethernet 0/0   R2(config - if)# ip helper - address 20.0.0.1   R3(config)# interface fastethernet 0/0   R3(config - if) # ip helper - address 20.0.0.1   R4(config)# interface fastethernet 0/0   R4(config - if)# ip helper - address 20.0.0.1

5.多項選擇題Which three IP multicast group concepts are true?()

A. If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.
B. A router does not have to be a member of a multicast group to recei ve multicast data.
C. A router must be a member of a multicast group to send to the group.
D. A router does not have to be a member of a multicast group to send to the group.
E. If a packet is sent to a multicast group address, all members of the multic ast group will receive it.
F. A router must be a member of a multicast group to receive multicast data.

最新試題

Which of the following IPv6 tunneling mechanisms support IPv6 IGP routing protocols?()

題型:多項選擇題

Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, and into the core of an Enterprise network. The branch also allows local hosts to communicate directly with public sites in th e Internet over this same DSL connection.Which of the following answers defines how the branch NAT config avoids performing NAT for the Enterprise directed traffic but does perform NAT for the Internet - directed traffic?()

題型:單項選擇題

The answers each list a tunnel method and two consecutive IPv6 address quartets.Which answers identify a tunneling method that relies on an IPv4 address to be embedded into an IPv6 address, within the correct quartets listed?()

題型:多項選擇題

An Enterprise rou ter, Ent1, displays the following excerpt from the show ip bgp command. ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true?()Network  Next Hop Metric LocPrf Weight Path*> 3.3.3.3 0 0 1 1 1 1 218 i

題型:單項選擇題

An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?()

題型:單項選擇題

An engineer is trying to summarize the following networks using the "ip summary- address eigrp"command:10.8.88.0/2510.8.89.48/2910.8.64.96/27Which network and subnet mask below would be the smallest EIGRP summary address to include all three subnets?()

題型:單項選擇題

The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output?()B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18

題型:單項選擇題

Which of the following  answers lists a multicast IPv6 address?()

題型:單項選擇題

Router R1 lists the following output from a show command. Which of the following is true about R1?()R1# show ip v6 interface f0/0FastEthernet0/0 is up, line protocol is upIPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456No Virtual link - local address(es):Global unicast address(es):2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI]Jo ined group address(es):FF02::1FF02::2FF02::1:FF:12:3456

題型:單項選擇題

Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?()ipv6 unicast- routinginterface f0/0ipv6 rip one enableipv6 address 2000::1/64interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 rip one enable

題型:單項選擇題