單項選擇題Network equipment supporting the use of flow control mechanisms has been recently installed. What is the purpose of flow control in a data network?()

A. It ensures that data is retransmitted if an acknowledgment is not received.
B. It reassembles segments in the correct order on the destination device.
C. It provides a mechanism for the receiver to control the transmission speed.
D. It regulates the size of each datagram segment.
E. All of the above are functions of flow control


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?()

A. This command sets a gateway of last resort for the TK1 router.
B. The number 100 indicates the number of hops to the destination network.
C. The interface with IP address 192.168.8.2 is on the TK1 router.
D. The command creates a static route for all IP traffic with the source address 192.168.24.64.
E. Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.
F. None of the above

2.單項選擇題A PC on a network segment sends data to another PC on a different segment.Which of the following correctly describe the correct order of how this data will be encapsulated?()

A. Data, Frame, Packet, Segment, Bit
B. Data, Frame, Segment, Packet, Bit
C. Data, Packet, Frame, Segment, Bit
D. Data, Packet, Segment, Frame, Bit
E. Data, Segment, Frame, Packet, Bit
F. Data, Segment, Packet, Frame, Bit

3.單項選擇題What term is used to describe the process where one frame is placed into a different type of frame?()

A. Framing
B. De-encapsulation
C. Encapsulation
D. De-framing
E. None of the above

4.多項選擇題Regarding PAR (Positive Acknowledgement and Re-transmission), which of the answer choices below are correct?()

A. The source device will only retransmit lost packets on the request of the destination device.
B. The source device starts a timer when it sends a segment and retransmits if an acknowledgment is not received before the timer expires.
C. The destination device acknowledges receipt of a segment by sending a packet with a new sequence number and the ACK bit sent.
D. The destination device acknowledges receipt of a segment by sending a packet that indicates the next sequence number it expects.
E. If the destination device does not receive a segment, all segments are retransmitted.
F. The source device keeps a record of all segments sent and expects and acknowledgment of each.

最新試題

A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? ()

題型:多項選擇題

Which command is used to display the placement and direction of an IP access control list on a router?()

題型:單項選擇題

Five minutes after issuing the show running-config command, a technician enters the command again and notices that several access list statements have been altered. Because of this, the technician believes that the router is being configured by an unknown person through Telnet. Before changing the router passwords, the technician would like to discover if anyone is connected to the router by Telnet and stop them from making further changes.Which commands will accomplish these options?()

題型:多項選擇題

Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()

題型:多項選擇題

What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?()

題型:單項選擇題

What is the subnetwork address for a host with IP address 201.100.5.68/28?()

題型:單項選擇題

Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? ()

題型:單項選擇題

Which of the following options lists the steps in PPP session establishment in the correct order?()

題型:單項選擇題

What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?()

題型:單項選擇題

Which connections allow the use of full-duplex Ethernet?()

題型:多項選擇題