An 802.1x client cannot authenticate to an autonomous access point configured for multiple vlans. the native vlan does not have an ssid configured.
Which one of the following links being down would prevent the clients from authenticating？（）
A.between the radius and the access point
B.between the client’s vlan and the wlse
C.between the native vlan and the wlse
D.between the client’s vlan and the radius
您可能感興趣的試卷
你可能感興趣的試題
A.1
B.4
C.2
D.5
E.3
In a deployment using the lightweight access points， clients set up to authenticate with eap-peap or eap-cisco wireless （leap） cannot authenticatE. upon inspection of the failed attempts report you see the following error： "unknown network access server nas."
What two problems can cause this type of failure？（）
A.misconfigured ip address of the aaa server on the wireless controller
B.misconfigured ip address of the wireless lan controller on the aaa server
C.misconfigured eap type on the wireless lan controller
D.misconfigured shared secret on the wireless lan controller
E.misconfigured eap type on the aaa server
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid tag data is not being collected.
On which device would you verify that rfid status has been enabled？（）
A.cisco wcs
B.access point
C.wireless controller
D.location manager
A.802.11b/g
B.radio
C.access point
D.802.11a
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid beacon rate is 10 seconds. you have discovered an issue with the rfid timeout value.
How should this value be changed？（）
A.change the value on the wireless controller to 45 seconds.
B.change the value on the wireless controller to 95 seconds.
C.change the value on the cisco wcs to 95 seconds.
D.change the value on the cisco wcs to 45 seconds.
最新試題
Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode？（）
You are trying to change the polling parameters used by the location manager via the Cisco WCS，and your request is being denied. What is wrong？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected toa wireless controller？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
You are troubleshooting a one-way call problem with a Cisco 7920 wireless IP phone on a standalone WLAN.What may cause this problem？（）
When configuring Cisco Secure ACS to support wireless EAP authentication， which device must be configured as a AAA client？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）