A. J0 errors detected in a specified interval
B. errors detected in a given Errored Second (ES)
C. errors detected in a given Severely Errored Second (SES)
D. errors the encryption algorithm detects in a specified interval
E. Bit Interleaved Parity (BIP) errors detected in a specified interval
您可能感興趣的試卷
你可能感興趣的試題
A. prevent the leakage of external fiber emissions
B. provide the optical network with the highest level of security possible
C. assure an even distribution of 1's and 0's for extended transmitter life
D. assure an adequate number of transitions for clock recovery at the receiver
E. prevent the receiver from assuming AIS inadvertently when all 0's are received
A. fibers are terminated incorrectly on a node
B. the channel number in the received K1 byte is not identical to the channel number transmitted in the K2 byte
C. the channel number in the received C1 byte is not identical to the channel number transmitted in the C2 byte
D. the channel number in the received C2 byte is not identical to the channel number transmitted in the C1 byte
E. the channel number in the received K2 byte is not identical to the channel number transmitted in the K1 byte
A.255
B.512
C.1024
D.4096
A.line timing
B.loop timing
C.internal timing
D.through timing
E.external timing
A.2
B.3
C.4
D.20
E.22
F.24
最新試題
Which device creates an OEO conversion?()
Which is a legitimate bandwidth matched pair?()
Click the Exhibit button. When designing a DWDM system with multiple amplified spans, a pre-amp is needed at Site B to (). (Choose three.)
Which timing mode is appropriate for a SONET NE that is adjacent to a SONET NE using BITS-1 timing source?()
Which three technologies are used to reduce chromatic dispersion accumulation in fiber-optic transmission systems? ()(Choose three.)
The ONS 15216 is a 32-channel system. The ONS 15216 OADMs are capable of adding and dropping one, two, or four channels. How are the OADMs provisioned to add and drop specific channels?()
Click the Exhibit button. The exhibit shows a 15454/15216 DWDM system and alarm indications. What are two possible sources of trouble shown in the system?() (Choose two.)
For lasers with tightly controlled wavelengths, approximately how far apart are the centers of adjacent wavelengths when 100 GHz spacing is used in a DWDM system?()
Click the Exhibit button. Given the following parameters: transmitter output (min): -2 dBm receiver input (min): -28 dBm 15216 Mux and Demux loss: 4.5 dB 16 channels maximum In which sites shown in the exhibit could the 15216 EDFAs be placed to minimize the number of EDFAs needed?()
The dispersion of a non-zero dispersion shifted fiber is 6 ps/nm*km at 1550 nm and 10 ps/nm*km at 1610 nm. What is the minimum dispersion compensation required if an L-Band DWDM signal travels through 200 km of fiber and has a dispersion tolerance of 1800 ps/nm?()