單項選擇題You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also, if the local OSPF route goes away, the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?()

A.static route needs to be added
B.floating static route needs to be added
C.bgp backdoor command
D.ospf backdoor command


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題

Refer to the exhibit. R2 and R3 are routers connected using Ethernet services from a service provider and can receive pings from each other. OSPF is configured as the routing protocol but adjacency is not happening. According to the output of the show commands in the exhibit, what could be the most likely cause of the problem?()

A.Ethernet interfaces were configured as point-to-point.
B.Process IDs are not matching.
C.Configured bandwidths do not match on both interfaces.
D.Broadcasts and multicast are not being propagated over the Ethernet services.
E.OSPF cost does not match on both interfaces.

4.單項選擇題

Refer to the exhibit. Routers A and B are directly connected and running EIGRP,but they are unable to form a neighbor relationship. What is the most likely cause?()

A.The network statements are misconfigured.
B.The IP address statements are misconfigured.
C.The autonomous system is misconfigured.
D.There is a physical issue with the cable.

5.單項選擇題

Refer to the exhibit. You are setting up a 2-gigabit EtherChannel. Following IEEE standards, the exhibit shows your configuration in a local switch1. However, EtherChannel is not coming up. Which one of these statements could be a possible reason?()

A.EtherChannel is only available in Cisco equipment.
B.The customer side is supposed to be running PAgP, which is a Cisco standard.
C.PAgP is not an IEEE standard. VRRP should be used.
D.The configuration on switch1 needs to be modified to use LACP

最新試題

A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()

題型:單項選擇題

How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?()

題型:單項選擇題

一堆交換機一個server、一個transpare,問配置prune在哪里配置?

題型:問答題

what is the advantage of policing opposite to shaping?

題型:問答題

As a CCNA candidate,you must have a firm understanding of the IPv6 address structure.Refer to IPv6 address,could you tell me how many bits are included in each filed?()

題型:單項選擇題

When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()

題型:單項選擇題

what is four ospf area type?

題型:問答題

Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()

題型:單項選擇題

SPT初始狀態(tài)之后的一個狀態(tài)是什么?

題型:問答題

Refer to the exhibit.How many broadcast domains exist in theexhibited topology?()

題型:單項選擇題