單項選擇題What is the difference between the Ethanalyzer and the SPAN feature in Cisco NX-OS?()

A. The Ethanalyzer captures control-plane traffic, while SPAN captures all traffic.
B. The Ethanalyzer captures all traffic including control-plane traffic, while SPAN captures only the control-plane traffic.
C. The Ethanalyzer captures only data traffic, while SPAN captures all traffic.
D. The Ethanalyzer captures only control traffic, while SPAN captures data traffic.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題With Cisco NX-OS on a Cisco Nexus platform, which command shows memory usage, total processes, and CPU state?()

A. show memory detailed
B. show process cpu sorted
C. show system resources
D. show hardware capacity

2.單項選擇題Which command will allow you to display the configured QoS group and the ingress buffer allocated to each QoS group?()

A. show interface priority-flow-control
B. show interface queuing
C. show queuing interface
D. show policy-map system type queuing
E. show policy-map interface ethernet  type queuing

3.單項選擇題

Nexus7000# config t 
Nexus700(config)# interface ethernet 2/11 
Nexus700(config-if)# switchport mode private-vlan host 
Nexus700(config-if)# switchport private-vlan host-association 14 50 
Nexus700(config-if)# exit  
Nexus700(config)# 
What will this command sequence achieve?()

A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50

4.多項選擇題Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority? ()

A. Port priority value can be configured between 1 and 65535.
B. A higher port priority value means a higher priority of LACP.
C. Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D. LACP uses the port priority with the port number to form the port identifier.
E. LACP Port priority default value should always be changed

5.單項選擇題Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled?()

A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute

最新試題

KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector, to report virtual IP and real server availability. Which statement is true about KAL-AP?()

題型:單項選擇題

Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS?()

題型:單項選擇題

Which is true when describing a connection replication in Cisco ACE?()

題型:單項選擇題

Which of the following are supported in Cisco Global Site Selector? ()

題型:多項選擇題

What interface is created when an FC Port Channel is created on a Cisco Unified Computing System?()

題型:單項選擇題

Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?()    

題型:單項選擇題

Given the following output: san-port-channel 12 is up  Hardware is Fibre Channel Port WWN is 24:0c:00:0d:ec:d3:5c:00  Admin port mode is NP, trunk mode is on  Port mode is NP Port vsan is 1 Speed is 8 Gbps  Member[1] : fc2/3 Member[2] : fc2/4 What does "Speed is 8 Gbps" indicate?()

題型:單項選擇題

Where are SAN Port Channel is created in UCS Manager?()

題型:單項選擇題

What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager?()

題型:多項選擇題

Your company wants Server 1/eth0 (vNIC 1) configured so that it always uses Fabric Interconnect A Port Channel 1 (Po1) when it communicates with anything outside of the Cisco UCS domain. However, if vNIC 1 fails over to Fabric Interconnect B using fabric failover, then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true? ()

題型:多項選擇題