多項選擇題Which three are valid methods to monitor and trend SAN port channels with DCNM?()

A. use summary view in the device manager
B. from the DCNM-SAN client, view ISLs in real time from the Performance drop-down list
C. for each port channel, select Monitor Continually
D. configure traps for each port channel to utilize RMON
E. set up flows with the DCNM-SAN client and use the Performance Manager web client for performance collections


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host?()

A. The switch receives the FCoE frame and forwards it to another switch over its VE port.
B. The switch receives the FCoE frame, deapsulates it, and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.
C. The switch receives the FCoE frame, deapsulates it, and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.
D. The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.

3.多項選擇題What are the two parallel SCSI specifications?()

A. Up to 25 m bus length
B. Only one device per SCSI bus
C. Up to 16 devices per SCSI bus
D. Half-duplex operation
E. Full-duplex operation

4.單項選擇題Which Ethernet field is used to differentiate between the FCoE frame and the FIP frame?()

A. Ethernet FCS
B. Source address
C. Destination address
D. EtherType
E. Protocol type

5.單項選擇題Which statement describes the FIP function of the FCoE Initiation Protocol? ()

A. It is required to establish the point-to-point FCoE links with the first switch in the path.
B. It is required to establish the point-to-point FCoE links with any switch across multiple Ethernet segments.
C. It is not used to build the FCoE links.
D. It is used to ensure lossless transport.

最新試題

When will an "all configuration" backup be imported into the Cisco UCS Manager?()

題型:單項選擇題

In the event of a GSS failure in a GSS cluster, which is true?()

題型:單項選擇題

What would be the cause for the following fault in UCS Manager?() "ether VIF x / xxx down, reason: ENM source pinning failed"

題型:單項選擇題

Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()

題型:單項選擇題

Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?()    

題型:單項選擇題

A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types?()

題型:多項選擇題

Given the following output: san-port-channel 12 is up  Hardware is Fibre Channel Port WWN is 24:0c:00:0d:ec:d3:5c:00  Admin port mode is NP, trunk mode is on  Port mode is NP Port vsan is 1 Speed is 8 Gbps  Member[1] : fc2/3 Member[2] : fc2/4 What does "Speed is 8 Gbps" indicate?()

題型:單項選擇題

Application Control Engine (ACE) can check the health of servers and server farms by configuring health probes (which are sometimes referred to as keepalives). A probe can be one of many types. Which are valid ACE probes? ()

題型:多項選擇題

In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?()

題型:單項選擇題

What interface is created when an FC Port Channel is created on a Cisco Unified Computing System?()

題型:單項選擇題