多項選擇題

You need to configure a new Company Catalyst 3560 switch for a VOIP-enabled office. 
Which  three statements are true about the voice VLAN feature on this switch?()

A.The default CoS value for incoming traffic is set up to 0.
B.The CoS value is trusted for 802.1p or 802.1q tagged traffic.
C.PortFast is automatically disabled when a voice VLAN is configured.
D.The voice VLAN feature is disabled by default.
E.The IP phone accepts the priority of all tagged and untagged traffic and sets the CoS value to 4.
F.When the voice VLAN feature is enabled, all untagged traffic is sent according to the default  CoS priority of the port


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

Refer to the exhibit. Which statement is true about a voice VLAN?()

A.Physically the voice network and the data network are separate.
B.The voice traffic will normally be on a different IP subnet than will the data traffic.
C.End user intervention is necessary to place the phone into the proper VLAN.
D.The same security policy should be implemented for both voice and data traffic.
E.The data VLAN must be configured as the native VLAN.

2.多項選擇題Which three are characteristics of voice traffic in the Company VOIP campus network?()

A.TCP retransmits
B.UDP priority
C.Bursty
D.Delay sensitive
E.Greedy
F.Drop sensitive

3.多項選擇題

Refer to the exhibit.  
What are three of the basic components of a VoIP network?()

A.software voice applications
B.multipoint control unit (MCU)  
C.gatekeeper  
D.call agent
E.interactive voice response (IVR) systems  
F.softphones

4.多項選擇題Which three QoS mechanisms can be configured to improve VoIP quality on a converged  network?()

A.The use of a queuing method that will give VoIP traffic strict priority over other traffic  
B.The use of RTP header compression for the VoIP traffic.
C.The proper classification and marking of the traffic as close to the source as possible
D.The use of 802.1QinQ trunking for VoIP traffic
E.The use of WRED for the VoIP traffic

5.單項選擇題

You need to troubleshoot some problems in the Company VOIP network associated with jitter.  
What is the cause of jitter?  ()

A. Packet drops
B. Transmitting too many small packets
C. Variable queue delays
D. Compression
E. None of the other alternatives apply

最新試題

Which three statements about STP timers are true?()

題型:多項選擇題

Refer to the exhibit. Which Virtual Router Redundancy Protocol (VRRP) statement is true about the roles of the master virtual router and the backup virtual router?()

題型:單項選擇題

Which three statements are true of the Link Aggregation Control Protocol (LACP)?()

題型:多項選擇題

If G1/0/1 on DS1 is shutdown, what will be the current priority value of the Vlan105’s group on DS1 ?()

題型:單項選擇題

Refer to the exhibit. Based on the output of the show spanning-tree command, which statement is true? ()

題型:單項選擇題

During routine maintenance, G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ? ()

題型:單項選擇題

DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ? ()

題型:單項選擇題

Which router redundancy protocol cannot be configured for interface tracking?()

題型:單項選擇題

What must be the same to make multiple switches part of the same Multiple Spanning Tree (MST)?()

題型:單項選擇題

Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result?()

題型:單項選擇題