單項選擇題

pany has implemented 802.1X authentication as a security enhancement. 
Which statement is  true about 802.1x port-based authentication?()

A. TACACS+ is the only supported authentication server type.
B. If a host initiates the authentication process and does not receive a response, it assumes it is  not authorized.
C. RADIUS is the only supported authentication server type.
D. Before transmitting data, an 802.1x host must determine the authorization state of the switch.
E. Hosts are required to havea 802.1x authentication client or utilize PPPoE.
F. None of the other alternatives apply.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

Refer to the exhibit. 
How will interface FastEthernnet0/1 respond when an 802.1x-enabled client  connects to the port?  ()

A. The switch will uniquely authorize the client by using the client MAC address.
B. The switch will cause the port to remain in the unauthorized state, ignoring all attempts by the  client to authenticate.
C. The switch port will disable 802.1x port-based authentication and cause the port to transition to  the authorized state without any further authentication exchange.
D. The switch port will enable 802.1x port-based authentication and begin relaying authentication  messages between the client and the authentication server.

2.單項選擇題

An attacker is launching a DoS attack on the Company network using a hacking tool designed to  exhaust the IP address space available from the DHCP servers for a period of time.
 Which  procedure would best defend against this type of attack? ()

A. Configure only trusted interfaces with root guard.
B. Implement private VLANs (PVLANs) to carry only user traffic.
C. Implement private VLANs (PVLANs) to carry only DHCP traffic.
D. Configure only untrusted interfaces with root guard.
E. Configure DHCP spoofing on all ports that connect untrusted clients.
F. Configure DHCP snooping only on ports that connect trusted DHCP servers.
G. None of the other alternatives apply

3.單項選擇題

The Company is concerned about Layer 2 security threats. 
Which statement is true about these  threats? ()

A. MAC spoofing attacks allow an attacking device to receive frames intended for a different  network host.
B. Port scanners are the most effective defense against dynamic ARP inspection.
C. MAC spoofing, in conjunction with ARP snooping, is the most effective counter-measure against reconnaissance attacks that use dynamic ARP inspection (DAI) to determine vulnerable  attack points.
D. Dynamic ARP inspection in conjunction with ARP spoofing can be used to counter DHCP  snooping attacks.
E. DHCP snooping sends unauthorized replies to DHCP queries.
F. ARP spoofing can be used to redirect traffic to counter dynamic ARP inspection.
G. None of the other alternatives apply.

4.單項選擇題

Refer to the exhibit. Port security has been configured on the switch port Fa0/5. 
What would  happen if another device is connected to the port after the maximum number of devices has been  reached, even if one or more of the original MAC addresses are inactive?()

A. The port will permit the new MAC address because one or more of the original MAC addresses  are inactive.
B. The port will permit the new MAC address because one or more of the original MAC addresses  will age out.
C. Because the new MAC address is not configured on the port, the port will not permit the new  MAC address.
D. Although one or more of the original MAC addresses are inactive, the port will not permit the  new MAC address.

5.單項選擇題

Refer to the exhibit. 
What is the problem with this configuration?()

 

A. Spanning tree PortFast cannot be configured on a port where a voice VLAN is configured.
B. Sticky secure MAC addresses cannot be used on a port when a voice VLAN is configured.
C. Spanning tree PortFast cannot be configured on a port when a sticky secure MAC address is  used.
D. The switch port must be configured as a trunk.

最新試題

Refer to the exhibit. What does the command channel-group 1 mode desirable do? () 

題型:單項選擇題

Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port:00:06:34: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/5 (not half  duplex), with SW_A FastEthernet0/4 (half duplex) , with TBA05071417(Cat6K-B) 0/4 (half duplex). What would be the possible outcome of the problem?()

題型:單項選擇題

Refer to the exhibit. The command switchport mode access is issued on interface FastEthernet0/13 on switch CAT1. What will be the result?()

題型:單項選擇題

Which two statements about the various implementations of STP are true?()

題型:多項選擇題

During routine maintenance, G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ? ()

題型:單項選擇題

Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result?()

題型:單項選擇題

Examine the diagram. A network administrator has recently installed the above switched network using 3550s and would like to control the selection of the root bridge.Which switch should theadministrator configure as the root bridge and which configuration command must theadministrator enter to accomplish this?()

題型:單項選擇題

During routine maintenance, it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time, DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ? ()

題型:單項選擇題

Refer to the exhibit. Switch 15 is configured as the root switch for VLAN 10 but not for VLAN 20. If the STP configuration is correct, what will be true about Switch 15?()

題型:單項選擇題

Refer to the exhibit. STP has been implemented in the network. Switch SW_A is the root switch for the default VLAN. To reduce the broadcast domain, the network administrator decides to split users on the network into VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 root primary on switch SW_A. What will happen as a result of this change?()

題型:單項選擇題